Outils pour utilisateurs

Outils du site


ltib

Différences

Ci-dessous, les différences entre deux révisions de la page.

Lien vers cette vue comparative

Les deux révisions précédentes Révision précédente
ltib [2011/05/04 11:54]
24.123.189.2 TWVYshERuHkuz
ltib [2011/06/26 13:26]
86.75.234.172 old revision restored
Ligne 1: Ligne 1:
-ySyXv6 ​[url=http://lynpszqtydds.com/]lynpszqtydds[/url][link=http://gmysmnjsrgge.com/]gmysmnjsrgge[/link]http://zhiknlsdjfqq.com/+ 
 +Hi paul 
 +I've tried tlib but without success: 
 + 
 +I selected logic omap 35xx reference board and I get an error on:  
 + 
 +arch/​arm/​kernel/​process.c:​154:​23:​ error: macro "​ledtrig_idle_state"​ passed 1 argumentsbut takes just 0 
 + 
 +while compiling the kernel :( 
 + 
 +same error if I run ./tlib -c  to ignore errors.... 
 + 
 + 
 +do you have any idea which part I should unselect? 
 + 
 +I've tried windows CE, but I get nothing else than the explorer and the media player... ​ :( I would like linux so much!!!! 
 + 
 +here is the log if you have some ideas... 
 + 
 + 
 +have a good week end 
 + 
 + 
 + 
 +------------------------------------ 
 + 
 + 
 + 
 + 
 + 
 +I selected logic omap 35xx reference board and I get an error on: 
 + 
 +arch/​arm/​kernel/​process.c:​154:​23:​ error: macro "​ledtrig_idle_state"​ passed ​= 
 +
 +arguments, but takes just 0 
 + 
 +while compiling the kernel ​:
 + 
 +same error if I run ./tlib -c  to ignore errors.... 
 + 
 +Hmm, first I'd have to ask what plaform I assume torpedo. ​ What and 
 +config was selected? ​ Send me  
 + 
 +  config/platform/​omap3_torpedo/​.config 
 + 
 +so I can use that to replicate the issue here. 
 + 
 +As a quick hack, do " 
 +  ./ltib -p kernel -m prep 
 + 
 +" to get the kernel source in rpm/​BUILD/​linux-2.6.28-rc8,​ then comment out the invocation 
 +of ledtrig_idle_state in 
 +  RPM/​build/​linux-2.6.28-rc8/​arch/​arm/​kernel/​process.c 
 + 
 +, and then 
 +rebuild/​deploy the kernel (by " 
 +  ./ltib -p kernel -m scbuild && ./ltib -p kernel -m scdeploy 
 + 
 +That should get you past the stubmling block - I'll have to dig 
 +through the Torpedo kernel config and figure out what's borked. 
 + 
 +--  
 +Peter Barada 
 +peter@the-baradas.com 
 + 
 + 
 + 
 + 
 +  ls in /home/​bvdp/​ltib-20100203/​config/​platform/​omap3_torpedo 
 +returns: 
 +  busybox.config ​ deployment.txt ​                           linux-2.6.29-rc3-android-omap3_torpedo.config ​ merge         ​pkg_map 
 +  defconfig ​      ​linux-2.6.28-rc8-pm-omap3_torpedo.config ​ main.lkc ​                                      ​packages.lkc ​ preconfigs 
 + 
 + 
 + 
 + 
 +  ./ltib -p kernel -m prep 
 + 
 +Processing: kernel-2.6.31-rc7-omap3logic 
 +========================================== 
 +Build path taken because: build key set, no prebuilt rpm, 
 + 
 + 
 +Cowardly refusing to clobber existing directory:​ 
 + /​home/​bvdp/​ltib-20100203/​rpm/​BUILD/​linux-2.6.31-rc7 
 +Remove this by hand if you really want to rebuild this package from scratch 
 + 
 + 
 + 
 +f_prep() returned an error, exiting 
 +traceback:​ 
 + ​main:​555 
 + 
 +Exiting on error or interrupt 
 + 
 + 
 + 
 +  ./ltib -p kernel 
 + 
 + 
 +ca chie... 
 + 
 +  find . | grep  process.c 
 + 
 +./​rpm/​BUILD/​linux-2.6.31-rc7/​kernel/​power/​process.c 
 +./​rpm/​BUILD/​linux-2.6.31-rc7/​arch/​microblaze/​kernel/​process.c 
 +./​rpm/​BUILD/​linux-2.6.31-rc7/​arch/​parisc/​kernel/​process.c 
 +./​rpm/​BUILD/​linux-2.6.31-rc7/​arch/​m68knommu/​kernel/​process.c 
 +./​rpm/​BUILD/​linux-2.6.31-rc7/​arch/​um/​kernel/​skas/​process.c 
 +./​rpm/​BUILD/​linux-2.6.31-rc7/​arch/​um/​kernel/​process.c 
 +./​rpm/​BUILD/​linux-2.6.31-rc7/​arch/​um/​os-Linux/​skas/​process.c 
 +./​rpm/​BUILD/​linux-2.6.31-rc7/​arch/​um/​os-Linux/​process.c 
 +./​rpm/​BUILD/​linux-2.6.31-rc7/​arch/​blackfin/​kernel/​process.c 
 +./​rpm/​BUILD/​linux-2.6.31-rc7/​arch/​mips/​kernel/​process.c 
 +./​rpm/​BUILD/​linux-2.6.31-rc7/​arch/​arm/​kernel/​process.c 
 +./​rpm/​BUILD/​linux-2.6.31-rc7/​arch/​powerpc/​kernel/​process.c 
 +./​rpm/​BUILD/​linux-2.6.31-rc7/​arch/​frv/​kernel/​process.c 
 +./​rpm/​BUILD/​linux-2.6.31-rc7/​arch/​h8300/​kernel/​process.c 
 +./​rpm/​BUILD/​linux-2.6.31-rc7/​arch/​m32r/​kernel/​process.c 
 +./​rpm/​BUILD/​linux-2.6.31-rc7/​arch/​s390/​kernel/​process.c 
 +./​rpm/​BUILD/​linux-2.6.31-rc7/​arch/​x86/​kernel/​process.c 
 +./​rpm/​BUILD/​linux-2.6.31-rc7/​arch/​mn10300/​kernel/​process.c 
 +./​rpm/​BUILD/​linux-2.6.31-rc7/​arch/​cris/​kernel/​process.c 
 +./​rpm/​BUILD/​linux-2.6.31-rc7/​arch/​cris/​arch-v10/​kernel/​process.c 
 +./​rpm/​BUILD/​linux-2.6.31-rc7/​arch/​cris/​arch-v32/​kernel/​process.c 
 +./​rpm/​BUILD/​linux-2.6.31-rc7/​arch/​xtensa/​kernel/​process.c 
 +./​rpm/​BUILD/​linux-2.6.31-rc7/​arch/​m68k/​kernel/​process.c 
 +./​rpm/​BUILD/​linux-2.6.31-rc7/​arch/​alpha/​kernel/​process.c 
 +./​rpm/​BUILD/​linux-2.6.31-rc7/​arch/​ia64/​kvm/​process.c 
 +./​rpm/​BUILD/​linux-2.6.31-rc7/​arch/​ia64/​kernel/​process.c 
 +./​rpm/​BUILD/​linux-2.6.31-rc7/​arch/​avr32/​kernel/​process.c 
 + 
 +  
 +il faut modifier  
 +  ./​rpm/​BUILD/​linux-2.6.31-rc7/​arch/​arm/​kernel/​process.c 
 + 
 + 
 +  cp rpm/​BUILD/​linux-2.6.31-rc7/​arch/​arm/​kernel/​process.c rpm/​BUILD/​linux-2.6.31-rc7/​arch/​arm/​kernel/​process.c.sav 
 + 
 + 
 + 
 + 
 + 
 + 
 +apres relancer la compil, erreur sur qtopia 
 + 
 ++ echo note that e2fsprogs-devel and libjpeg/​libjpeg-devel are required on host 
 +note that e2fsprogs-devel and libjpeg/​libjpeg-devel are required on host 
 ++ cp -r tmake/​lib/​qws/​linux-arm-g++ tmake/​lib/​qws/​linux--g++ 
 ++ cp -r qtopia/​mkspecs/​qws/​linux-arm-g++ qtopia/​mkspecs/​qws/​linux--g++ 
 ++ test -e qtopia/​src/​libraries/​qtopia/​custom-linux--g++.h 
 ++ cp qtopia/​src/​libraries/​qtopia/​custom-linux-generic-g++.h qtopia/​src/​libraries/​qtopia/​custom-linux--g++.h 
 ++ test -e qtopia/​src/​libraries/​qtopia/​custom-linux--g++.cpp 
 ++ cp qtopia/​src/​libraries/​qtopia/​custom-linux-generic-g++.cpp qtopia/​src/​libraries/​qtopia/​custom-linux--g++.cpp 
 ++ echo Patch #22 (qtopia-free-2.2.0-gcc-4.3.2-2.patch):​ 
 +Patch #22 (qtopia-free-2.2.0-gcc-4.3.2-2.patch):​ 
 ++ patch -p1 -s 
 ++ exit 0 
 +Executing(%build):​ /bin/sh -e /​home/​bvdp/​ltib-20100203/​tmp/​rpm-tmp.57337 
 ++ umask 022 
 ++ cd /​home/​bvdp/​ltib-20100203/​rpm/​BUILD 
 ++ cd qtopia-free-2.2.0 
 ++ source ./​ltibqtopiaconfig 
 +/​home/​bvdp/​ltib-20100203/​tmp/​rpm-tmp.57337:​ 1: source: not found 
 +error: Bad exit status from /​home/​bvdp/​ltib-20100203/​tmp/​rpm-tmp.57337 (%build) 
 + 
 + 
 +RPM build errors: 
 +    Bad exit status from /​home/​bvdp/​ltib-20100203/​tmp/​rpm-tmp.57337 (%build) 
 +Build time for qtopia-omap:​ 19 seconds 
 + 
 +Failed building qtopia-omap 
 + 
 + 
 +f_buildrpms() returned an error, exiting 
 +traceback:​ 
 + ​main:​555 
 + 
 + 
 +Started: Tue Feb 23 14:57:59 2010 
 +Ended: ​  Tue Feb 23 16:41:33 2010 
 +Elapsed: 6214 seconds 
 + 
 +These packages failed to build: 
 +qtopia-omap 
 + 
 +Build Failed 
 + 
 +Exiting on error or interrupt 
 + 
 + 
 + 
 + 
 + 
 +quand je fais  
 +  ./configure  
 +  make dans qtopia, j'​obtiens 
 + 
 + 
 +rm -f libqpe.so.1.5.3 libqpe.so libqpe.so.1 libqpe.so.1.5 
 +g++ -shared -Wl,​-soname,​libqpe.so.1 -o libqpe.so.1.5.3 .obj/​release-shared/​qmemoryfile.o .obj/​release-shared/​calendar.o .obj/​release-shared/​global.o .obj/​release-shared/​localtr.o .obj/​release-shared/​mimetype.o .obj/​release-shared/​menubutton.o .obj/​release-shared/​filemanager.o .obj/​release-shared/​fileselector.o .obj/​release-shared/​resource.o .obj/​release-shared/​qpeapplication.o .obj/​release-shared/​qpestyle.o .obj/​release-shared/​qpedialog.o .obj/​release-shared/​config.o .obj/​release-shared/​applnk.o .obj/​release-shared/​sound.o .obj/​release-shared/​tzselect.o .obj/​release-shared/​qmath.o .obj/​release-shared/​alarmserver.o .obj/​release-shared/​password.o .obj/​release-shared/​timestring.o .obj/​release-shared/​storage.o .obj/​release-shared/​qpemessagebox.o .obj/​release-shared/​qpedebug.o .obj/​release-shared/​qpemenubar.o .obj/​release-shared/​qpetoolbar.o .obj/​release-shared/​categorymenu.o .obj/​release-shared/​categoryedit_p.o .obj/​release-shared/​categoryselect.o .obj/​release-shared/​categorywidget.o .obj/​release-shared/​mediarecorderplugininterface.o .obj/​release-shared/​mediaplayerplugininterface.o .obj/​release-shared/​qdawg.o .obj/​release-shared/​datebookdb.o .obj/​release-shared/​xmlreader.o .obj/​release-shared/​imageedit.o .obj/​release-shared/​datebookmonth.o .obj/​release-shared/​qmemoryfile_unix.o .obj/​release-shared/​custom-qtopia.o .obj/​release-shared/​fontmanager.o .obj/​release-shared/​fontdatabase.o .obj/​release-shared/​qpedecoration_qws.o .obj/​release-shared/​network.o .obj/​release-shared/​networkinterface.o .obj/​release-shared/​qcopenvelope_qws.o .obj/​release-shared/​power.o .obj/​release-shared/​ir.o .obj/​release-shared/​pluginloader_p.o .obj/​release-shared/​bgexport.o .obj/​release-shared/​quuid.o .obj/​release-shared/​qlibrary.o .obj/​release-shared/​process.o .obj/​release-shared/​process_unix.o .obj/​release-shared/​qlibrary_unix.o .obj/​release-shared/​categories.o .obj/​release-shared/​stringutil.o .obj/​release-shared/​vcc_yacc.o .obj/​release-shared/​vobject.o .obj/​release-shared/​cp1252textcodec.o .obj/​release-shared/​contact.o .obj/​release-shared/​event.o .obj/​release-shared/​timeconversion.o .obj/​release-shared/​palmtoprecord.o .obj/​release-shared/​task.o .obj/​release-shared/​passwordbase_p.o .obj/​release-shared/​categoryeditbase_p.o .obj/​release-shared/​moc_menubutton.o .obj/​release-shared/​moc_fileselector.o .obj/​release-shared/​moc_qpeapplication.o .obj/​release-shared/​moc_qpedialog.o .obj/​release-shared/​moc_tzselect.o .obj/​release-shared/​moc_storage.o .obj/​release-shared/​moc_qpemenubar.o .obj/​release-shared/​moc_qpetoolbar.o .obj/​release-shared/​moc_categories.o .obj/​release-shared/​moc_categorymenu.o .obj/​release-shared/​moc_categoryselect.o .obj/​release-shared/​moc_imageedit.o .obj/​release-shared/​moc_datebookmonth.o .obj/​release-shared/​moc_ir.o .obj/​release-shared/​moc_process.o .obj/​release-shared/​moc_fileselector_p.o .obj/​release-shared/​moc_categoryedit_p.o .obj/​release-shared/​moc_qpedecoration_p.o .obj/​release-shared/​moc_bgexport_p.o .obj/​release-shared/​moc_qlibrary_p.o .obj/​release-shared/​moc_passwordbase_p.o .obj/​release-shared/​moc_categoryeditbase_p.o ​  ​-lcrypt -luuid -lm -ldl -ldl -L/​home/​bvdp/​ltib-20100203/​rpm/​BUILD/​qtopia-free-2.2.0/​qtopia/​lib -L/​home/​bvdp/​ltib-20100203/​rpm/​BUILD/​qtopia-free-2.2.0/​qt2/​lib -lqte 
 +/​usr/​bin/​ld:​ cannot find -luuid 
 +collect2: ld a retourné 1 code d'​état d'​exécution 
 +make[5]: *** [../../​../​lib/​libqpe.so.1.5.3Erreur 1 
 +make[5]quittant le répertoire « /home/bvdp/​ltib-20100203/​rpm/​BUILD/​qtopia-free-2.2.0/qtopia/​src/​libraries/​qtopia » 
 +make[4]: *** [all] Erreur 2 
 +make[4]: quittant le répertoire « /home/​bvdp/​ltib-20100203/​rpm/​BUILD/​qtopia 
 +make[3]: *** [sub-libraries-qtopia] Erreur 2 
 +make[3]: quittant le répertoire « /​home/​bvdp/​ltib-20100203/​rpm/​BUILD/​qtopia 
 +make[2]: *** [all] Erreur 2 
 +make[2]: quittant le répertoire « /​home/​bvdp/​ltib-20100203/​rpm/​BUILD/​qtopia 
 +make[1]: *** [all] Erreur 2 
 +make[1]: quittant le répertoire « /​home/​bvdp/​ltib-20100203/​rpm/​BUILD/​qtopia 
 + 
 +*********************************************************************** 
 +
 +*                  ERROR: Building Qtopia has failed. 
 +
 +* Please search the make output for any error messages. 
 +
 +* Hint: If the configuration has changed since the last successfull 
 +* build consider using make clean to ensure that all binaries 
 +* are rebuilt using the new configuration. 
 +
 +* For more information about the build process please use a browser 
 +* and go to the getting started section in: 
 +*     /​home/​bvdp/​ltib-20100203/​rpm/​BUILD/​qtopia-free-2.2.0/​qtopia/​doc/​html/​ 
 +
 + 
 + 
 + 
 + 
 + 
 + 
 +==== peut etre essayer de ne pas mettre d'​interface graphique ==== 
 +pas de clavier tactile alors 
 + 
 +console par ssh? 
 + 
 +par serial? 
 + 
 + 
 + 
 +===== support de logicpd?​===== 
 +http://www.logicpd.com/products/​development-kits/​zoom-omap35x-torpedo-development-kit 
 + 
 +http://​www.logicpd.com/​sites/​default/​files/​1012929C_OMAP35x_Torpedo_SOM_Brief.pdf 
 + 
 + 
ltib.txt · Dernière modification: 2011/06/26 13:26 par 86.75.234.172